Controlled Access Speed Gate Turnstile with Infrared Photocells
Feature:
- Mechanism with the world’s top DC brushless motor and accurately positioning encoder, to make sure the arms to rotate rapidly and exactly, stably and noiselessly;
- Durable because all the internal parts are with antirust and antiseptic treatment;
- Low power consumption, saving energy and protecting environment;
- By using more than 10 pairs of military level high-performance infrared sensors, it can accurately achieve many functions, such as anti-tailgating, detect illegal passing, anti-clamping and anti-bruising, direction-judgment function and so on.
Technical Parameter:
Machinery Mechanism | MTHTTM Lossless mechanism |
Operation Temperature | -20~60 |
Swing gate material | Organic glass (default); tempered glass (optional) |
Passing mode | controlled mode / free mode / forbidden mode |
Power and Voltage | 100-240VAC, 50/60HZ |
Operation Voltage | DC24V |
Rated Power | 100W |
Communication Interface | RS485 / RS232 (default); TCP/IP (optional) |
Humidity | 0~95% (non-condensation) |
Positioning Method | Encoder |
Surface treatment | brushed finish |
IR Sensors | 10 Pairs (default) |
Basic Function:
- Self-recovery function: The swing gates do not return to the hindered zero position because of human intervention. After revoking human intervention, the gate automatically return to the hindered zero position.
- Passing mode switching function: The entry and exit can be set independently controlled mode / free mode / forbidden mode
- Automatic reset function: The turnstile will open the gate after receiving the valid opening signal when standby. The swing gate will return to the hindered zero position automatically under the following situation:
(1) Within the allowed time, pedestrians have been detected in the specified direction passing the passage;
(2) Over the allowed time, there is no people has been detected passing in the passage.
- Automatic adjustment function: When the turnstiles need to re-adjust because of mechanical wear, the main board can automatically adjust, accurate and convenient.
- Passing indication function:
(1) Direction indicator: The direction indicator is installed on the top of the housing to indicate the valid passing direction.
(2) Passing status indicator: It is installed inside the housing side, indicating whether the swing gates can open after receiving the valid signal.<
Automatic High Speed Gate Turnstile / Controlled Access Turnstiles